Finishing Systems

We offer a complete range of finishing systems to suit all requirements and scales of production, including the bespoking of systems to ensure each finishing system is tailor made for the client. Below are a sample of our finishing system components.

Designed for multi process operations and sized to suit components. Normally with well type Dry Off Oven at unload end of plant. Items carried through Plant by simple manual operated overhead hoist unit, or when required by rigid mast transporters capable of fully automatic operation.

Items for processing passing through multi stage spray Pre treatment supported from overhead conveyor. Zone lengths determined by required process times and conveyor speed. Spray jet assemblies mounted in easily adjustable joints fitted in spray headers of either PVC, ABS copolymer, mild steel or stainless steel to suit temperatures.

Spray Housing showing unique side mounted process chemical and rinse holding tanks. This design maximises production output due to the elimination of vertical rise and falls and allows spray pre treatment systems to be located in low head room areas. Housing and tanks are manufactured from materials to suit process, either mild steel or stainless steel. Extract fans, conveyor seals and operator walkway are incorporated within the housing.

Air circulated Tunnel type design, speed to suit process requirements. With either single pass or multi pass conveyor. Fuels utilised to suit client. Oil heated, indirect with heat exchanger, Gas - Direct heated or Electrical heated.

Either gas or electric type often used prior to the entry to an air circulated oven as a preheat zone to reduce length of circulated zone to enable close batching of colours without problems of cross contaminations and to enhance finish of components. Also supplied when required as a stand alone facility.

Computer controlled short wave Infra red Oven designed to process heavy awkward powder coated components.